How to Set Up IPv6 Interfaces For Pure IPv6 Routing
This example shows how to configure your USG Z's WAN and LAN interfaces which
connects two IPv6 networks. USG Z periodically advertises a network prefix of
2006:1111:1111:1111::/64 to the LAN through router advertisements.
Figure 346 ZyWALL/USG access the internet via IPv6
Note:
Instead of using router advertisement, you can use DHCPv6 to pass the
network settings to the computers on the LAN.
This example was tested using USG110 (Firmware Version: ZLD 4.15) and
ZyWALL 310 (Firmware Version: ZLD 4.15).
www.zyxel.com
231/255