Set Up The Zywall/Usg Remote Server Setting; Test The Remote Server - ZyXEL Communications ZyWALL 110 Handbook & Instructions

www.zyxel.com

Set Up the ZyWALL/USG Remote Server Setting

Go to CONFIGURATION > Log & Report > Log Settings > Remote Server > Edit. Set Log
Format to be VRPT/Syslog. Type the Server Address to be the Vantage Report server IP
address (10.251.30.61 in this example).
Use the System Log drop-down list to change the log settings for all of the log
categories.
Figure 282 CONFIGURATION > Log & Report > Log Settings > Remote Server > Edit

Test the Remote Server

In the VRPT Sever, go to Logs > Log Viewer, click Search. The screen displays the
device log information. (It may take 5 - 10 minutes to display the log after just added
the device)
189/255