Before You Call For Service - Jenn-Air A130 R Use And Care Manual

Before You Call for
Service
Check the following list to be sure a service call is necessary. A quick reference
of this manual, as well as reviewing additional items to check, may prevent an
unneeded service call.
If the cartridge does not operate:
• check if the cartridge is properly installed.
• the surface control knob may not be turned ON.
• check for a blown circuit fuse or a tripped main circuit breaker.
• the range surface control switch may be at fault. Switch cartridge to
other side of range; if it operates on that side, range control switch may
be at fault.
If the cartridge "beeps" and the utensil is not heating:
• the utensil being used may not be made from a ferromagnetic metal or
may not be of the proper shape or diameter.
• the utensil may not be centered properly on the cooking area.
• the surface control knob has been turned on for the wrong cooking
area.
If the cartridge stops heating during the cooking process:
• the ambient temperature may be abnormally high.
• the air inlet or outlet openings may be blocked.
• the utensil has boiled dry, or is empty, causing the overheating
protective device to automatically switch the element off.
• the surface control knob may have been turned off or turned from the HI
position.
All specifications subject to change by manufacturer without notice.
SPECIFICATIONS
Power Source: AC 208/240 volts 60Hz
Wattage: 2730/3200
Input on cooking Areas: 72 to 1200 W -- small cooking area
120 to 2000 W -- large cooking area
21