Canon CLC5100 Series Manual page 192

Chapter 5
No
.
4
5
6
7
8
9
5-62
Motor
M20 (waste toner feed motor)
M18C, M18M, M18Y, M18Bk (C/
M/Y/K developing motor)
M9 (fixing motor), M9005
(application roller drive motor)
M14 (transfer belt motor)
M9002, M9003 (fixing front feed
motor)
Buffer pass unit motor
Details of MTR
Control
erates for 10 sec, stops for 3 sec, and then operates for
10 sec and stops.
Its operation stops in response to a press on the Stop
key.
Operates for 10 sec, stops for 3 sec, and then operates
for 10 sec and stops.
Its operation stops in response to a press on the Stop
key.
Rotates for 10 sec at standard speed (138 mm/sec) for
plain paper (64 to 104 g), for 10 sec at standard speed
(90 mm/sec) for thick paper (157 g), for 10 sec at
standard speed (68 mm/sec) for ultra thick paper (209
g), for 10 sec at gloss speed (45 mm/sec) for ultra thick
paper (209 g), and stops for 3 sec.
Its operation stops in response to a press on the Stop
key.
Operates for an equivalent of 2 rotations of the belt and
stops for 3 sec; then, operates for an equivalent of 2
rotations, and stops.
Its operation stops in response to a press on the Stop
key.
Rotates for 10 sec at standard speed (138 mm/sec) for
plain paper (64 to 104 g), for 10 sec at standard speed
(90 mm/sec) for thick paper (157 g), for 10 sec at
standard speed (68 mm/sec) for ultra thick paper (209
g), for 10 sec at gloss speed (45 mm/sec) for ultra thick
paper (209 g), and stops for 3 sec.
Its operation stops in response to a press on the Stop
key.
Rotates for 10 sec at standard speed (138 mm/sec) for
plain paper (64 to 104 g), for 10 sec at standard speed
(90 mm/sec) for thick paper (157 g), for 10 sec at
standard speed (68 mm/sec) for ultra thick paper (209
g), for 10 sec at gloss speed (45 mm/sec) for ultra thick
paper (209 g), and stops for 3 sec.
Its operation stops in response to a press on the Stop
key.