Supero 2022TC-BIBQRF User Manual page 88

A+ SERVER 2022TC-BIBQRF/BTRF USER'S MANUAL
Caution: Do not slide the serverboard into a drawer as this will damage the
components on the bottom of the board.
7. Secure the serverboard to the drawer using the rounded, Phillips head
screws included for this purpose. Apply no more than 8 inch-pounds to avoid
damaging the board and components.
8. Install the adapter card associated with the serverboard. Refer to the next
section for instructions on installing the adapter card.
9. Secure the CPUs, heatsinks, and other components to the serverboard as
described in the serverboard documentation.
10. Connect the cables between the serverboard, backplane, chassis, front panel,
and power supply, as needed. Fans may be temporarily removed to allow
access to the backplane ports.
11. Replace the expansion card bracket and secure the bracket with a screw.
12. Return the serverboard drawer into the chassis.
13. Connect the AC power cord.
Caution: Do not slide serverboard into the tray as this will damage components on
the bottom of the board.
Caution: To avoid damaging the serverboard and its components, do not apply force
greater than 8 inch-lbs. to mounting screws.
Figure 6-11. Installing the Serverboard in the Serverboard Drawer
Note: The serverboard drawing is an example only; actual layout differs slightly
6-10