Oki ES9455 Management Manual page 64

2 SETTING ITEMS (ADMIN)
3
Select the option that you want to install, and press [INSTALL].
The installation confirmation screen is displayed.
4
Press [YES].
The installation begins.
Do not remove the USB storage device until the data transfer is complete. Removing the device while data are
being transferred could destroy them or cause a malfunction of the equipment.
5
When the installation is complete, press [OK].
The option which has just been installed is displayed on the LICENSE MANAGEMENT screen.
If the installation fails, the message "It failed in the installation. Do you retry?" will be displayed on the CAUTION
screen. In this case, press [YES] to perform the installation again.
62 GENERAL