1.SETTING ITEMS (USER)
2
Press the portion of the illustration corresponding to the tray whose paper type you
want to change and press the desired paper type button, then press [OK] to complete
the settings.
The PAPER TYPE screen consists of two sections: THICKNESS and ATTRIBUTE.
Set THICKNESS when using thick paper and recycled paper.
Set ATTRIBUTE when using the paper in the tray for a specific purpose. For example, if you select [INSERT] for a
tray, the paper in the tray will always be used for copy insertion.
The displayed buttons differ depending on the model.
For details of the paper types, refer to the Copying Guide "Chapter 1: BEFORE USING EQUIPMENT".
Paper placed in a tray set with THICKNESS other than [PLAIN] or [RECYCLED PAPER], or paper placed in
a tray set with ATTRIBUTE other than [NONE] is out of the scope of the Automatic Paper Selection (APS).
For details of APS, refer to the Copying Guide "Chapter 3: BASIC COPY MODES".
When an attribute other than [NONE] is set for a tray, the paper placed in this tray is out of the scope of the
Automatic Change of Paper Source function.
For details of this function, see the following page:
P.96 "COPY"
1 SETTING ITEMS (USER)
TRAY
19