Table of Contents
Advertisement
Configuration: Exceptions
An exception is any deviation from the NVR's normal behaviour. The NVR
can alert you in multiple ways.
Enable Event Hint:
When an event occurs, a message will appear on-
screen. Click this if you wish to disable on-screen messages.
Event Hint Settings:
You can select which event messages will appear
on-screen.
Exception Type:
The event type you'd like the NVR to react to.
HDD Full:
As the name suggests, this event occurs when the hard drive
has run out of space. This event type becomes redundant as "Overwrite"
is enabled by default (see page 21).
HDD Error:
This occurs when the NVR has difficulties accessing the
hard drive.
Network Disconnected:
This will occur if the NVR has difficulty con-
necting to the Internet.
IP Conflicted:
This will occur if the NVR detects another device on the
same network with a conflicting IP address.
Illegal Login:
This will occur if the NVR detects an incorrect login.
Record Exception:
This will occur if there are unexpected errors during
capture such as a hard drive failure, if the hard drive is full or if the hard
drive quota has been changed.
PoE Power Overload:
If the power consumption of the connected cam-
eras exceed the maximum PoE power.
Audible Warning:
The NVR will use its internal buzzer to emit an alarm
tone.
47
Advertisement
Table of Contents
