Table of Contents
Advertisement
Playback: Tag
Tag playback will isolate
events based on the
tag
information
that
has been applied to
a particular video. In
both normal and event
playback modes, you can
apply tags depending on
what is happening on-
screen. For example,
each time a particular
person appears within
the video, you can add a
tag which then makes it
easier to search and find
videos with that person.
1
2
1. Mute:
Mutes audio playback.
2. Start clipping:
This button allows you to set mark in and out points on
your video which you can then export to a USB storage device such as a
flash drive or hard drive. When you have selected a video to play press
this button at the mark in point and press it again at the mark out point.
To save the file right-click the mouse to exit then click "Yes". Select the
save location then click "Export". Click "OK" to confirm.
3. Tag management:
This allows you to edit or delete tags that you add-
ed to the video.
11-11-2014 Tue 17:11:07
3
4
5
4. Zoom in:
Click this to enter digital zoom mode. Use the PIP (pic-
ture-on-picture) screen on the bottom right to select a different area to
zoom in to. Right-click to exit.
5. Play controls:
These are your play, pause, rewind and forward con-
trols.
6. Zoom in/out:
Zoom in and out of the timeline for precise control.
Select from one or
more camera(s) that
you would like to search
on. Input the tag name
(be careful as it is case
sensitive), select a start
time & date and end
time & date then click
the "Search" button.
The NVR will start
searching and will then
display videos fitting
your search criteria.
Double-click a file to
play. Click the "Back"
button to search again.
6
28
Advertisement
Table of Contents
