Configuration: Live View: General
Video Output Interface:
As the NVR has a VGA and HDMI output, this
cannot be changed.
Live View Mode:
2 x 2 is the default mode and will display up to 4 video
channels on-screen. Selecting 1 x 1 will display the first video channel
full-screen. Other views available are 1 + 5, 1 + 7 and 3 x 3.
Dwell Time:
The time in seconds to dwell on a video channel when en-
abling "Start Auto-switch" on the Live View Menu Bar. This only works
when the Live View mode is set to 1 x 1.
Enable Audio Output:
This enables the audio output connection on the
NVR.
Event Output:
As the NVR has a VGA and HDMI output, this cannot be
changed.
Full Screen Monitoring Dwell Time:
alarm event screen.
Don't forget to click "Apply" to save settings.
Click the "Back" button to go back to the Main Menu.
The time in seconds to display an
45