Configuration: General: General
The settings for lan-
guage,
resolution,
time zone, system date
& time and Daylight
Savings (DST) are set-
up during the setup
wizard.
Language:
The language that the NVR's menus, alerts and other com-
munications will use. Multiple languages are available.
Resolution:
Set the output resolution of the NVR according to the dis-
play that is connected. Check the documentation included with your dis-
play to see the maximum resolution supported.
Time Zone:
Set this to the time zone where you happen to be. For exam-
ple, people in the Australian Eastern Time zone (Canberra, Sydney and
Melbourne) choose GMT+10:00, whilst the Eastern Standard Time zone
(USA and Canada) choose GMT-05:00 (GMT stands for Greenwich Mean
Time - it's the baseline that keeps all the different time zones in sync).
Date Format:
The format the date will be displayed.
System Date:
You can manually set the date if it is incorrect.
System Time:
You can manually set the time if it is incorrect.
Mouse Pointer Speed:
Move the slider to increase or decrease the
mouse pointer speed.
Enable Wizard:
When checked, the NVR will automatically run the setup
wizard when it is switched on. The setup wizard itself contains the op-
tion to disable it.
Enable Password:
When enabled, the NVR will require a username and
password to access even for local users.
Don't forget to click "Apply" to save settings.
Click the "Back" button to go back to the Main Menu.
33