Configuration: Live View: General - Swann hdr8-8050 Instruction Manual

Configuration: Live View: General

Video Output Interface:
As the DVR has a VGA and HDMI output, this cannot be changed.
Live View Mode:
2 x 2 is the default mode for the 4 channel model and 3 x 3 for the 8
channel model. This will display up to 4 video channels on-screen for the 4 channel
model and up to 8 video channels on-screen at a single time for the 8 channel model.
Selecting 1 x 1 will display the first video channel full-screen. Other views available on
the 8 channel model are 1 + 5 and 1 + 7.
Dwell Time: The time in seconds to dwell on a video channel when enabling "Start
Auto-switch" on the "Live View Menu Bar". This only works when the "Live View Mode"
is set to 1 x 1.
Enable Audio Output:
This enables the audio output connection on the DVR.
Event Output:
As the DVR has a VGA and HDMI output, this cannot be changed.
Full Screen Monitoring Dwell Time:
The time in seconds to display an alarm event
screen.
Don't forget to click "Apply" to save settings.
14