Supported Os - Contec BX710 Series User Manual

1. Introduction
- Expansion slots to hold PCI bus boards (Model with Expansion Slot).
BX-710P2-AC5 has two PCI slots.
BX-710P4-AC5 has four PCI slots.
Board size that can be attached is 240(L) x 107(H)[mm].
- Safety design with an anti-disconnection mechanism and BIOS setting retention function
Unnecessary trouble can be avoided by the use of clamps for prevention of cable disconnection and the
use of metal fittings for prevention of CF card disconnection. Retention of CMOS data by EEPROM
allows the system to start up even when the battery has run out. In addition, the use of a
CONTEC-customized BIOS (mfd. by Award) allows support to be provided at the BIOS level.
- Structure free from mechanical moving parts (Windows Embedded Standard-installed model)
The use of a CF card or a SSD for the storage device has eliminated any moving parts, improving the
levels of the environment resistance (ambient temperature, impact, vibration), reliability and quietness.
It is possible to use the EWF function of OS. It is designed for safety required for embedding purpose,
for example, prohibiting unwanted writing to the CF card or the SSD with EWF function will relieve the
concern about the writing limits to the CF card or the SSD and prevent an unintentional system alteration.
* EWF (Enhanced Write Filter) is a function specific to Windows Embedded Standard that protects the disk from being actually written
by redirecting the writing to RAM.
- Installation-compatible with conventional products in the IPC-BX 900/701/700/630/620/600 series
For the installation-compatible with conventional products in the IPC-BX 900/701/700/630/620/600
series, it is easy to migrate from the existing system.

Supported OS

- Windows XP Professional
- Windows Embedded Standard 2009
2
BX710 series User's Manual