Lincoln MKZ 2017 Owner's Manual page 314

A
B
D C
E158839
1. Shut the engine off.
2. Clean the area around the clamp that
connects the air filter assembly to the
rubber hose (A).
MKZ (CC9) Canada/United States of America, enUSA, Edition date: 201602, Second Printing
Maintenance
E158840
3. Remove the bolt cover (if equipped).
4. Remove two bolts that attach the air filter
assembly to the front of the vehicle (B).
5. Loosen the clamp holding the air filter
assembly to the rubber hose (A).
6. Remove the harness retaining clip by
pulling up (C). Do not disconnect the
sensor (D).
7. Without disconnecting the sensor (D), pull
the air filter assembly up to disconnect
the air filter assembly from the seated
grommets located underneath the air
filter assembly.
311
E158841
8. Rotate the air filter assembly 90 degrees
counterclockwise and reinstall into the
rubber hose.
9. Tighten the clamp (A).
10. The transmission fluid level indicator
can now be accessed.