How to Operate the C200
Power On
Note: The POWER Switch is only intended to be switched Off
when the C200 Controller/Preamplifier is not used for
extended periods of time, like
while away on vacation. During
normal operation, the POWER
Switch should stay in the On
Position. Press the STANDBY/ON
Push button for turning the C200
On and Off. The C200 may also
be turned On or Off with the
supplied Remote Control.
Balance Control
Balance Display
22
Source Selection
Volume Control
Figure23
Volume Display
Processors
Record Monitor
Note: If the Text Full Mode has been selected, the Front Panel
Figure 24
Alphanumeric Display will display the Text Short Mode
in order to indicate Selected Record Source.