McIntosh C200 Owner's Manual page 10

MAIN POWER CONTROL
Output sends a turn-on signal
to a McIntosh Power Amplifier
when the C200C is turned On
TO C200 PREAMPLIFIER
Connector accepts a 25 con-
ductor cable that connects
all control signals and power
supply voltages from the
C200C to the C200P
10
AMPLIFIER POWER CONTROL
Outputs send a turn-on signal to a
McIntosh Power Amplifier when
the C200C Front Panel OUTPUT 1
and/or 2 is On
ACCessory POWER CONTROL
Outputs send a turn-on signal to
McIntosh Source Component(s)
and/or Power Controller when the
C200C is On
DATA PORTs send signals to
compatible source components
and allow remote control opera-
tion
PASSTHRU Power
Control input receives
a turn-on signal from
a McIntosh Home
Theater Controller
C200C Rear Panel Connections
Connect the C200C
power cord to a live AC
outlet. Refer to informa-
tion on the back panel of
the C200C to determine
the correct voltage for
your unit
The EXTernal SENSOR
jack permits the connection
of a McIntosh IR sensor for
remote operation
Main Fuse holder,
refer to information
on the back panel of
the C200C to deter-
mine the correct
fuse size and rating