McIntosh C200 Owner's Manual page 14

How to Connect the C200 with Passthru Mode
Note: There is approximately a one half second delay in
the turn on of the second Power Amplifier, so as
not to tax the AC Power Line.
Note: It is important to make sure that the two C200P
Rear Panel Slide Switches are set to the
appropriate Input that a Source Component has
been connected to. Example, if a second turntable
is connected to the PH 2(mm) Input, then the Slide
Switch must be set to the PH2 position and not
AUX 2, in order for the sound of the Turntable to
be heard.
Note: Balanced and Unbalanced Inputs and Outputs can
14
be mixed. For example, you may connect signal
sources to Unbalanced Inputs and send signals out
from the Balanced Outputs. You can also use
Balanced and Unbalanced outputs simultaneously,
connected to different power amplifiers.
McIntosh A/V Control Center
McIntosh AM/FM Tuner
McIntosh CD/DVD Player