Wireless Settings - D-Link DIR-605 User Manual

Broadband aggregation router

Hide thumbs Also See for DIR-605:

Table of Contents

Section 3 - Configuration

If you want to configure the wireless settings on your router using

the wizard, click Wireless.Connection..Setup.Wizard.and refer to

page 43.

Click Add.Wireless.Device.with.WPS if you want to add a wireless

device using Wi-Fi Protected Setup (WPS) and refer to page 46.

Note: This option is disabled by default. To use this option, you must

enable the wireless function. Click Manual.Wireless.Network.Setup

and check the Enable Wireless box. Refer to the next page.

WLAN must be enabled in two places.

1. Enable it by going to Setup>Fusion.Settings>Wireless.Mode.

and select either Multiple.Routers.or Single.Router.

2. Next, go to Setup>Wireless. Settings>Manual.Wireless and

check Enable.

Note:.You.must.enable.both.selections.in.order.to.turn.the.WLAN.

On..Enabling.only.one.will.not.work.and.the.WLAN.will.remain.off..

If you want to manually configure the wireless settings on your router

click Manual Wireless.Network.Setup.and refer to the next page.

D-Link DIR-605 User Manual

Wireless Settings

Table of Contents