Procedure - LG MG295 Service Manual

12. AUTO CALIBRATION
1. Connect as Fig 6-2(RS232 serial cable is connected between COM port of PC and MON port of
TEST JIG, in general)
2. Set the Power Supply 4.0V
3. Set the 3 rd , 4 th of DIP SW ON state always
4. Press the Phone power key, if the Remote ON is used, 1

12.4 Procedure

1. Connect as Fig 12.2.2 (RS232 serial cable is connected between COM port of PC and MON port of
TEST JIG, in general.)
2. Run Hot_Kimchi.exe to start calibration.
3. From the Calibration menu, Select MG295!
LGE Internal Use Only
(3)
MG295
- 120 -
st ON state
Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes