Table of Contents
Advertisement
1.3
Certification Marks Attached to the Instrument
The certification marks attached to the instrument and their meanings are summarized below.
This mark, which stands for European Conformity "Conformité
Européene", indicates that "The instrument complies with the
European
environmental protection legislations". See Section
If these marks are displayed on the instrument, they indicate
that "This product has been tested to Safety Requirements
Conforms to
of Electrical Equipment for Measurements, Control and
ANSI/UL Std. 61010-1
Laboratory use; Part 1: General Requirements of ANSI/UL
61010-1 and CAN/CSA-C22.2 No 61010-1". Intertek ETL listed
Certified to
mark, which stands for Electrical Testing Laboratories, identifies
CAN/CSA Std. 61010-1
that the product has been tested by Intertek, found in
compliance with accepted national standards, and it meets the
minimal requirements required for sale or distribution.
product
directives,
for details.
health,
safety
and
12.1
Page 8
Advertisement
Table of Contents
