Table of Contents
Advertisement
5.3.2 Reagent Connections
DANGER
Use of 25 liter containers is recommended for each BioTector reagents. Figure 14 below shows the correct
setup and connection of BioTector reagents: Acid (1.8N Sulfuric Acid) and Base (1.2N Sodium Hydroxide).
See
Section 6
Figure 14 BioTector reagent setup and connections
Special precautions are needed when working with chemical reagents, both
when renewing reagents and when dealing with leaks or spills. Some reagents
can cause chemical burns and may cause injury or death if swallowed. Please
refer to the symbols and codes on the reagent containers.
Reagents and Calibration Standards
for further details.
Page 59
Advertisement
Table of Contents
