Genie Super Tower ST-20 Operator's Manual page 6

Operator's Manual
SAFETY RULES
Collision Hazards
Do not tilt the machine back unless the area is
clear of personnel and obstructions.
Check the work area for
overhead obstructions or
other possible hazards.
Use common sense and
planning when transporting
the machine on an incline
or slope.
Do not load for transport unless the machine and
vehicle are on a level surface. Use proper lifting
techniques to load the machine.
Damaged Machine Hazards
Do not use a damaged or
malfunctioning machine.
Do not use a machine with a
worn, frayed, kinked or damaged
cable.
Do not use a machine with less
than 4 wraps of cable on the
winch drum in the stowed
position.
Conduct a thorough pre-operation
inspection prior to each use.
Be sure that the operator's manual is complete,
legible and in the storage container located on the
machine.
Be sure all decals are in place and legible.
Maintain proper lubrication on the winch. See
Genie Super Tower Parts and Service Manual . Do
not allow oil or grease on braking surfaces.
4
Do not use any type of lubrication on the column
surfaces.
Bodily Injury Hazard
Do not grasp the cable.
Lifting Hazards
Use proper lifting techniques to load or tilt the
machine.
Improper Use Hazard
When leaving a Genie Super Tower unattended with
a load, secure from unauthorized use. Unauthorized
personnel may attempt to operate the machine
without proper instruction, creating an unsafe
condition.
Genie Super Tower
First Edition • Seventh Printing
Part No. 32950