Genie Super Tower ST-20 Operator's Manual page 13

First Edition • Seventh Printing
Test One-Speed Winch Operation
1 Install the adjustable forks.
2 Raise the carriage by
firmly grasping the
winch handles and
rotating them towards
the mast.
Result: The winch
should operate
smoothly, free of
hesitation or binding.
3 Lower the carriage by firmly grasping the winch
handles and rotating them away from the mast.
After lowering to the desired position, turn the
winch handles toward the mast (raise the load)
1
/ turn to set the brakes.
4
Result: The winch should operate smoothly, free
of hesitation or binding.
Part No. 32950
down
up
Genie Super Tower
Test Two-Speed Winch Operation
1 Install the adjustable forks.
2 Shift the winch to the slow speed.
3 Raise the carriage
by firmly grasping
the winch handles
and rotating them
towards the mast.
Result: The winch
should operate
smoothly, free of
hesitation or binding.
4 Lower the carriage by firmly grasping the winch
handles and rotating them away from the mast.
After lowering to the desired position, turn the
winch handles toward the mast (raise the load)
1
/ turn to set the brakes.
4
Result: The winch should operate smoothly, free
of hesitation or binding.
5 Shift the winch to the fast speed and repeat
steps 3 and 4.
Test Mast Sequencing
1 Install the adjustable forks.
2 Raise the carriage to full height by firmly
grasping the winch handles and rotating them
towards the mast.
Result: The carriage should rise to the top of the
front mast section, followed in consecutive
order by each mast section.
3 Fully lower the carriage. After lowering to the
desired position, turn the winch handles toward
the mast (raise the load)
brakes.
Operator's Manual
FUNCTION TESTS
down
up
1
/ turn to set the
4
11