Genie Super Tower ST-20 Operator's Manual page 10

Operator's Manual
PRE-OPERATION INSPECTION
Pre-operation Inspection
Be sure that the operator's manual is complete,
legible and in the storage container located on
the machine.
Be sure that all decals are legible and in place.
See Decals section.
Check the following components or areas for
damage, improperly installed or missing parts and
unauthorized modifications:
Winch and related components
Base components
Outriggers, outrigger screw jacks, outrigger
foot pads and outrigger casters
Mast columns
Exterior plastic shim for safety brake
Cable anchor
Cables and pulleys
Carriage hold-down latch
Wheels and casters
Adjustable forks
Nuts, bolts and other fasteners
Cable (kinks, frays, abrasions)
8
Check the entire machine for:
Dents or damage
Corrosion or oxidation
Cracks in welds or structural components
Be sure that all structural and other critical
components are present and all associated
fasteners and pins are in place and properly
tightened.
Be sure that there is a minimum of 4 wraps of
cable around the winch drum when the carriage
is fully lowered.
Genie Super Tower
First Edition • Seventh Printing
Part No. 32950