Interconnection Instructions - HP 7475a Operation And Interconnection Manual

Apple Macintosh/Macintosh Plus/II/SE
(RS-232-C Interface)
Apple Macintosh Computer
Apple Macinl<lsh Plus
Apple Macintosh 11
Apple Macinl<lsh SE

Interconnection Instructions

Turn off your plotter and computer equipment.
1.
2. Set the switches on the rear panel of your plotter as shown in the
following illustration. Your plotter checks the switch settings only
when you turn it on, so be sure the plotter is turned off before
changing the switch settings.
SET S1 TO '0' FOR
NO PARITY. SETTING
OF 52 IS IRRELEVANT.
Computer
SET TO US POSITION FOR A AND B
PAPER OR TO MET FOR A4 AND A3
PAPER.
SET TO A4 FOR A AND A4 PAPER
OR TO A3 FOR B AND A3 PAPER.
SET 84 TO M 1 · AND 8 1 , 82. AND 83
TO MO· FOR 2400 BAUD RATE.
SET TO POSITION
OPERATING ENVIRONMENT.
PWITER INTERCONNECTION
Cable
HP 92219M
HP 17302A
HP 17302A
HP 17302A
" 0 "
FOR ENOLlNE
3·15