HP 7475a Operation And Interconnection Manual page 45

NOTE: If necessary, snap the spacer off the shaft, slide the pinch
wheel to the proper position, and snap the spacer back onto the
shaft.
•
Pinch Wheel Position for A and
Pinch Wheel Position for A4 and A3 Size Paper
3. Move the paper loading lever to the
raises the pinch wheels. It also stores and caps the pen to avoid
getting ink on the new paper.
4.
Lay a sheet of paper on the platen surface so the paper is aligned
with the paper guide (the white line at the left rear of the platen)
and the left edge of the platen. A and A4 size paper are loaded with
the long side horizontel. B and A3 size paper are loaded with the
long side vertical. Refer to the following illustration.
5. Move the paper loading lever to the
lowers the pinch wheels to
B Size Paper
PAPER LOAD
PAPER HOLD
secure
the paper and allow it free movement.
PLO'ITER OPERATION
position. This
I
I position. This
2-27