Interconnection Instructions; Personal Computers (Compatibles Using Rs-232-C Interface) - HP 7475a Operation And Interconnection Manual

Personal Computers
(Compatibles using RS-232-C Interface)
These instructions tell you how to c6nnect your plotter to the following
compatible computers.
AT&T PC 6300
COMPAQ DESKPRO 286 and 386/20
HP Vectra, ES/l2, QS/l6, and RS/20
IBM AT, PC, PC/XT, and PS/2
AT&T PC 6300 ,
COMPAQ 286 and 386,
IBM AT, PC, PC/XT, PS/2
with standard serial interface
using a 25-pin male connector
with asynchronous communication
adapter using a 9-pin male connector
HP Vectra, ES/l2, QS/16, RS/20
with HP 24540A or HP 24541A card
using 9-pin male connector
with the HP 2454lA dual serial card
using 25-pin female connector

Interconnection Instructions

1.
Turn off your plotter and computer equipment.
If necessary, install the serial interface card. (Refer to your com­
2.
puter documentation for details.) If you installed a serial card, go to
step 3.
NOTE: If you have more than one serial port installed, you will need
to know whether you're connecting the plotter to COMl or COM2
(most software will not run on COM3). You will need this information
for testing communications and for configuring your software. If you
are using COM2, be sure to substitute COM2 for COMl in the
. •
instructions
34
PLO'ITER INTERCONNECTION
Computer
Cable
HP l7255D
HP 24542G
HP 24542G
HP l 7255M
or HP 13242G