Rear Seats
The rear seats allow for three
passengers.
Note: Middle Seat: The rear seat is
designed as a 4+1 seat vehicle. The
middle seat is of limited use. It is
recommended that this seat only be
used by a person who can use the
backrest as a substitute for the head
restraint.
Rear Seat
The seats and the seatbelts are
considered as components of the
protection system for the vehicle's
occupants.
Note: Refer to the "Seatbelts" in
"Safety" for further information.
Split Folding Rear Seat
— If Equipped
The rear seatbacks can be folded
forward to provide an additional storage
area.
Rear Seat
Partial Extension Of The Luggage
Compartment (1/3 Or 2/3)
Extending the right side of the trunk
allows you to carry two passengers on
the left part of the rear seat, while
extending the left side allows you to
carry one passenger.
Proceed as follows:
04066S0005EM
1. Completely lower the rear seat head
restraints.
2. Place the seatbelt so that it doesn't
impede the movement of the backrest
while tilting it.
3. Operate lever 1 to tilt the left part or
lever 2 to tilt the right part of the
backrest: it will automatically tilt
forward. If necessary, assist the
backrest during the initial stage of
tilting.
04066S0005EM
Seat Release Levers
1 — Left Side Seat Release Lever
2 — Right Side Seat Release Lever
Full Expansion Of The Trunk
Tilting the rear seat completely forwards
allows maximum loading volume.
Proceed as follows:
1. Completely lower the rear seat head
restraints.
2. Place the seatbelts so that they
don't impede the movement of the
backrest while tilting it.
3. Use levers 1 and 2 to fold down the
backrests: these will fold down
forwards automatically. If necessary,
accompany the backrests during the
initial stage of tilting.
04066S0007EM
29