Rear Seats - Alfa Romeo Stelvio Supplement To Owners Handbook

IMPORTANT Electrical adjustment is only
allowed when the ignition device is turned
to ON and for about 60 seconds after it is
turned to STOP. It is also possible to move
the seat for about
60 seconds after opening/closing the
door, locking/unlocking the vehicle or
switching the front central courtesy
light on.
Seat inclination adjustment (tilting)
(where provided)
The seat cushion angle can be set to
four positions. Lift or lower the front
of control 1, fi g. 2, to move the front of
the seat in the corresponding direction.
Release control 1 when the seat has
reached the desired position.
Backrest width adjustment
(where provided)
Press the switches 4, fi g. 2, to adjust the
backrest width by means of the lateral
padding.
2
Seat cushion extension
(where provided)
Lift the lever 6, fi g. 3, and push the front
of the cushion forward or back. It can
move a few centimetres.

REAR SEATS

3)
The rear seats, fi g. 2, allow three
passengers.
WARNING
1) All adjustments must be made with the car
stationary.
2) After releasing the adjustment lever,
always check that the seat is locked on the
guides by trying to move it back and forth.
If the seat is not locked into place, it may
unexpectedly slide and cause the driver to
lose control of the car.
3) Always make sure that all occupants
are seated and wearing their seat belts
correctly.
IMPORTANT
1) The fabric seat upholstery has been
fi g. 3
designed to withstand long-term wear due
to normal use of the car. Some precautions
are however required. Avoid prolonged
and/or excessive rubbing against clothing
accessories such as metal buckles and Velcro
strips which, by applying a high pressure on
the fabric in a small area, could cause it to
break, thereby damaging the upholstery.
2) Do not place any kind of object under the
electrically adjusted seats as it could impede
their movement or otherwise damage the
drives.
fi g. 4