Disposal Of Used Coolant; Engine Cooling/Intercooler System - Alfa Romeo Giulia 2017 Owner's Manual

Hide thumbs Also See for Giulia 2017:
Table of Contents

Advertisement

Check the hoses of the engine/
intercooler cooling system to ensure
that the rubber has not deteriorated
and that there are no cracks, tears, cuts
or obstructions in the expansion tank
side and radiator side connectors.
Should there be any doubt regarding
leaks from the system (e.g. if frequent
top ups are required), have the seal
checked at an authorized dealer.
With the engine off and at normal
operating temperature, check that the
cooling system radiator cap is closed
properly.
Warning!
Do not open hot engine cooling system.
Never add engine coolant (antifreeze) when
the engine is overheated. Do not loosen or
remove the cap to cool an overheated
engine. Heat causes pressure to build up in
the cooling system. To prevent scalding or
injury, do not remove the pressure cap
while the system is hot or under pressure.
Do not use a pressure cap other than
the one specified for your vehicle. Personal
injury or engine damage may result.
Note: Before removing the coolant
reservoir cap, wait for the system to
cool down.
216
Topping Up / Draining / Flushing
The Engine/Intercooler Coolant
If the engine coolant (antifreeze) is dirty,
have cleaning and flushing carried out
at an authorized dealer.
See the "Maintenance Plan" for the
correct servicing intervals.
Note:
For topping up, use a fluid with the
same characteristics as those
indicated in the "Fluids And
Lubricants" table (see "Technical
Specifications" chapter).
Do not use pure water,
alcohol-based coolants, corrosions
inhibitors or additional anti-rust
products because they may be
incompatible with the engine coolant
and cause the clogging of the radiator.
The use of propylene glycol-based
coolant is also not recommended.

Engine Cooling/Intercooler System

Cap
To prevent loss of engine coolant, make
sure that the expansion tank cap is
closed. If it is open, screw it completely
until you reach/hear the click.
Periodically check the cap and clean it
from any foreign bodies that may have
deposited on the external surface.
Warning!
Never add coolant with the engine hot
or overheated.
Do not attempt to cool an overheated
engine by loosening or removing the cap.
The heat causes a considerable increase in
pressure in the cooling system.
To prevent damage to the engine, only
use the engine cooling circuit caps
provided.

Disposal of Used Coolant

Disposal of engine/intercooler coolant is
subject to legal requirements: contact
the appropriate body to determine local
regulations.

Advertisement

Table of Contents
loading

Table of Contents