Warning Lights And Messages On The Instrument Panel; Clock & Date Selectable Menu Options; Instrument Cluster Display Selectable Menu Options - Alfa Romeo Giulia 2017 Owner's Manual

Clock & Date
Clock & Date Selectable Menu
Options
The following settings can be modified
under the "Clock & Date" menu:
Sync With GPS Time: activates or
deactivates the clock synchronization
through the GPS. If the function is
deactivated, the options Set Time and
Set Date are enabled
Set Time: set the time manually
Time Format: set the time format to
either a 12-hour and a 24-hour clock)
Set Date: set the date manually
Restore Settings: restores the factory
settings
To access and the change the setting,
turn and push the Rotary Pad.
70
Cluster
05036S0017EM
Instrument Cluster Display
Selectable Menu Options
The following settings can be modified
under the "Cluster" menu:
Warning buzzer volume: set the
volume of the warning buzzer
Trip B: activate or deactivate the Trip
function
Phone repeat: activate or deactivate
repeating the Phone function screens
on the instrument cluster display
Restore Settings: restores the factory
settings
To access and the change the setting,
turn and push the Rotary Pad.
WARNING LIGHTS
AND MESSAGES ON
THE INSTRUMENT
PANEL
The following pages consist of warning
lights and messages.
Note:
The warning light turns on together
with a dedicated message and/or
chime when applicable. These
indications are precautionary and as
05036S0018EM
such must not be considered as
exhaustive and/or alternative to the
information contained in the Owner's
Manual, which you are advised to read
carefully in all cases. Always refer to
the information in this section in the
event of a failure indication.
The failure indicators appearing on
the display are divided into two
categories: very serious and less
serious faults. Serious faults are
indicated by a repeated and prolonged
warning "cycle." Less serious faults are
indicated by a warning "cycle" with a
shorter duration. You can stop the
warning cycle in both cases by
pushing the button located on the
windshield wiper stalk. The instrument
panel warning light will stay on until the
cause of the failure is eliminated.