Interior Lights; Front Map Reading Lights - Alfa Romeo Giulia 2017 Owner's Manual

Hide thumbs Also See for Giulia 2017:
Table of Contents

Advertisement

Static Bending Light
Function (SBL) — If
Equipped
The SBL function utilizes Light Emitting
Diodes (LEDs) in order to better
illuminate the street and increase the
light angle while turning. This function is
enabled by rotating the light switch to
position
or
(AUTO). The SBL
LEDs activate when the speed is below
25 mph (40 km/h).
This function can be activated/
deactivated on the Information and
Entertainment System by selecting the
following functions in sequence on the
main menu: "Settings", "Lights" and
"Cornering Lights".
38

INTERIOR LIGHTS

Front Map Reading
Lights
The front map/reading and overhead
lights are mounted in the overhead
console. Each light can be turned on by
pushing the corresponding switch on
the console. These switches are backlit
for night time visibility. To turn the lights
off, push the switch a second time.
Overhead Console
1 — Driver's Reading/Map Light Switch
2 — Rear Overhead Lights Switch
3 — Overhead Lights Switch
4 — Front Map Reading Lights Switch
5 — Passenger's Reading/Map Light
Switch
6 — Passenger's Reading/Map Light
7 — Center Reading/Map Light
8 — Driver's Reading/Map Light
Note: Before getting out of the vehicle,
ensure that the overhead lights are off.
This will prevent the battery level from
being drained once the doors are
closed. If a light is left on accidently, the
overhead lights turn off automatically
approximately 15 minutes after the
engine has been turned OFF.
Overhead Light Timing — If
Equipped
On certain models, to assist getting in
and out of the vehicle at night or in
poorly-lit areas, two timed modes have
been provided.
Timing While Getting Into The
Vehicle — The overhead lights turn on
according to the following modes:
Will illuminate for a few seconds
when the doors are unlocked.
Will illuminate for approximately three
minutes when one of the doors is
04136S0001EM
opened.
Will illuminate for a few seconds
when the doors are locked.
Timing is interrupted when the ignition
is cycled to ON.

Advertisement

Table of Contents
loading

Table of Contents