Hilti TE 16 Operating Instructions Manual page 17

ORIGINAL OPERATING INSTRUCTIONS
TE 16/-C/-M rotary hammer
It is essential that the operating
instructions are read before the tool is
operated for the first time.
Always keep these operating instructions
together with the tool.
Ensure that the operating instructions are
with the tool when it is given to other
persons.
Operating controls and parts
Chuck
Function selector switch
Control switch
Forwards/reverse switch
Side handle with depth gauge
Theft protection system
(accessory for TE 16-M available as option)
Lock symbol
(accessory for TE 16-M available as option)
Supply cord
Contents
1. General information
2. Description
3. Tools and accessories
4. Technical data
5. Safety rules
6. Before use
7. Operation
8. Care and maintenance
9. Troubleshooting
10. Disposal
11. Manufacturer's warranty - tools
12. EC declaration of conformity
Printed: 07.07.2013 | Doc-Nr: PUB / 5070798 / 000 / 00
1. General information
1.1 Safety notices and their meaning
-CAUTION-
Draws attention to a potentially dangerous situation
that could lead to minor personal injury or damage
to the equipment or other property.
-NOTE-
Draws attention to instructions and other useful infor-
mation that help the user to employ the product effi-
ciently.
1.2 Pictograms
Warning signs
General
warning
Symbols
Read the
operating theft protection
instructions
before use.
These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out
cover pages. Keep these pages open while studying
the operating instructions.
Page
In these operating instructions, the TE 16, TE 16-C or
13
TE 16-M is referred to as "the tool".
14
Location of identification data on the tool
15
The type designation can be found on the type identifi-
15
cation plate and the serial number on the side of the motor
17
housing. Make a note of this data in your operating instruc-
19
tions and always refer to it when making an enquiry to
20
your Hilti representative or service department.
22
22
Type:
23
23
23
Serial No.:
Warning:
electricity
Equipped with Lock symbol
system
en
Warning:
hot surface
Return waste
material for
recycling
13