Table of Contents
Advertisement
Setting the external output resolution
Change the setting for outputting images to an external monitor or other external device (recorder,
etc.).
Select the menu.
MENU
: [OUTPUT SETUP] # [RESOLUTION] # desired setting
[SYSTEM]/[1080p]/[1080i]/[DOWN CONV.]
≥ [SYSTEM] automatically sets the output resolution according to the setting in [REC FORMAT].
If the images are not output on the external device when the setting is [SYSTEM], switch to the
method [1080p], [1080i] or [DOWN CONV.] which enables the images to be displayed on your
external device. (Please read the operating instructions for the external device.)
≥ [DOWN CONV.] outputs images in standard picture quality.
∫ To use an AV cable for external output
1
Select the [AV OUT] menu.
MENU
: [DISP SETUP] # [AV OUT] # [ON]
2
Select the [RESOLUTION] menu.
MENU
: [OUTPUT SETUP] # [RESOLUTION] # [DOWN CONV.]
≥ In the following cases, the video and audio are not output from VIDEO OUT terminal and AUDIO
OUT terminal:
j When an HDMI cable is connected to this unit
j [RESOLUTION] is set to the settings other than [DOWN CONV.] (Unless [REC FORMAT] is set
to [SA 576/50.00i])
≥ When [REC FORMAT] is set to [SA 576/50.00i], [RESOLUTION] is fixed to [SYSTEM].
≥ [RESOLUTION] cannot be set during Freeze Frame.
≥ Images may not be displayed on the external device for several seconds in some cases, such as
when changing between scenes.
About external output resolutions
The external output resolution varies depending on the [RESOLUTION] setting and connected
terminal.
≥ When [RESOLUTION] is set to [SYSTEM], the external output resolution varies depending on the
picture size and frame rate in [REC FORMAT].
(l
86)
- 119 -
Advertisement
Table of Contents
