Table of Contents
Advertisement
USB Host Mode
If you connect an external media device, such as USB HDD or USB flash memory (commercially-
available) to this unit, you can copy motion pictures and still pictures recorded on this unit to the
external media device.
It can also play back the scenes and still pictures copied to the external media device.
≥ This unit supports USB 3.0.
Refer to the following support site for information about an external media device.
http://pro-av.panasonic.net/
(This Site is English only)
Connecting to an external monitor
Connect an external monitor to output images.
A AV cable*
B HDMI cable*
*1
Use a commercially-available AV cable.
*2
Use a commercially-available High Speed HDMI cable.
If possible, we recommend using a cable with a length of 3 m or less.
When connecting with an HDMI cable using an HDMI-to-DVI converter, etc., be sure to
connect the HDMI cable to the connector of this unit last.
Connecting the HDMI cable to the connector of this unit first may result in malfunction.
Remote operations with an iPad
Attaching a wireless module that support this unit
allows you to connect to a wireless LAN network. You can perform the following operations by
connecting this unit and an iPad on which the AG ROP application is installed:
≥ Checking the camera status
≥ Checking the thumbnail images of recorded scenes
≥ Controlling the camera remotely (recording control and Time Code/User Information operations)
A USB 3.0 (Host mode)
B External media device (commercially-available)
1
2
C External monitor
(l
131) to the USB HOST terminal of this unit
- 15 -
Advertisement
Table of Contents
