Panasonic AG-UX90 Operating Instructions Manual page 187

Hide thumbs Also See for AG-UX90:
Table of Contents

Advertisement

During USB Host mode
Display
This external media
cannot be used.
Disconnect the USB
cable from this unit.
CANNOT CHECK
CONNECTED DEVICE.
DISCONNECT THE USB
CABLE FROM THIS UNIT.
FORMATTING FAILED.
Formatting failed.
Disconnect the USB
cable from this unit.
During copying between SD cards or copying to an external media device
Display
PLEASE CHECK THE
EXTERNAL MEDIA.
Use destination media
formatted with same as SD
card.
CANNOT COPY.
SELECTED SCENES
EXCEED CAPACITY.
Exceeds capacity. Please
reselect.
No scene to copy.
Description
This is displayed when the
memory capacity of the
external media is 32 GB or
below or above 2 TB.
This is displayed when the
device is connected to this unit
with a product such as a USB
hub.
The external media device
cannot be formatted.
This is displayed when an
attempt to format the
connected external media fails.
Description
Copying cannot be performed due to, for
example, a problem with the copy
destination media device.
This is displayed when the SD card
and copy destination media differ in
their format (FAT32/exFAT)*.
* FAT32 is a format used for SDHC
memory cards. exFAT32 is a format
used for SDXC memory cards.
This is displayed when AVCHD
scenes on the SD card and those on
the copy destination media differ in
their system frequency (59.94 Hz/
50.00 Hz). (AVCHD scenes with
different system frequencies cannot
be recorded to the same media.)
The copy destination media lacks
adequate space.
This is displayed when scenes
specified as copy sources consist only
of scenes recorded with other devices.
- 187 -
Behavior and cause
≥ Connect a supported external
media.
≥ Do not connect the devices with
a product such as a USB hub.
Connect to this unit directly.
≥ Change the connected external
media device.
≥ Check the connected external
media.
Behavior and cause
≥ Check the copy
destination media
device.
≥ Check the format of the
copy destination media.
≥ Copy AVCHD scenes to
a recordable media so
that their system
frequency and that of
AVCHD scenes on the
media match.
≥ Change the copy
destination media, or
delete unnecessary
scenes.
≥ Use an SD card
containing scenes
recorded with this unit.

Advertisement

Table of Contents
loading

Table of Contents