Recording Check; Last Scene Delete - Panasonic AG-UX90 Operating Instructions Manual

Hide thumbs Also See for AG-UX90:
Table of Contents

Advertisement

Focus Assist 2
≥ Register "Focus Assist 2" to a USER button.
You can set the Focus Assist.
≥ You can set the Focus Assist method in [FOCUS ASSIST 2] in the [SW SETUP] menu.
≥ When [FOCUS ASSIST 1] in the [SW SETUP] menu is set to [BOTH], the USER button is
disabled.

Recording Check

≥ Register "Recording Check" to a USER button.
Approximately 2 seconds at the end of the video recorded last can be played back. It will return to
recording screen once the playback is completed.
≥ Playback operation is not possible during the Recording Check.
≥ Recording Check is not possible in following cases:
j When the unit is turned on/off
j When the THUMBNAIL button is pressed
j When the SD card is inserted/removed
j When the setting of [REC FORMAT] is changed
j Set [2 SLOTS FUNC.] to [SIMULTANEOUS].
j PRE-REC is used
j During the Interval Recording
j During Freeze Frame

Last Scene Delete

≥ Register "Last Scene Delete" to a USER button.
The motion picture recorded last can be deleted.
Deleted scenes cannot be restored.
1
Press USER button or touch USER button icon in the recording screen.
2
Touch [YES].
≥ It will return to recording screen without deleting by touching [NO].
≥ Last Scene Delete is not possible in following cases:
j When the unit is turned on/off
j When the THUMBNAIL button is pressed
j When the SD card is inserted/removed
j When the setting of [REC FORMAT] is changed
j Set [2 SLOTS FUNC.] to [SIMULTANEOUS].
j During the Interval Recording
(l
56)
(l
91, 164)
(l
162)
(l
86)
(l
162)
(l
79)
(l
79)
(l
147)
(l
161)
(l
79)
(l
147)
(l
161)
- 85 -

Advertisement

Table of Contents
loading

Table of Contents