Selecting The Resolution And Frame Rate Of The Raw Output - Panasonic AU-EVA1 Operating Instructions Manual

When [FREQUENCY] is set to [50.00i]
Can be set only when [SDI RAW] is set to [OFF].
[SENSOR MODE]
[S35 5.7K]

Selecting the resolution and frame rate of the RAW output

Resolution of the RAW output from the <SDI OUT> terminal can be selected in the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [SDI RAW].
When [SDI RAW] is set to anything other than [OFF], [SENSOR MODE], [MAIN PIXEL], and [MAIN CODEC] cannot be set.
[FREQUENCY]
[23.98p]
[24.00p]
[29.97p]
[25.00p]
[50.00p]
[59.94p]
@ NOTE
t When [FREQUENCY] is set to [50.00i]/[59.94i], [SDI RAW] is fixed to [OFF].
Chapter 5 Shooting — Shooting
[MAIN PIXEL]
[1920x1080]
[SDI RAW]
[S35 5.7K]
[CROP 4K]
[CROP&MIX 2K]
[S35 5.7K]
[CROP 4K]
[CROP&MIX 2K]
[CROP 4K]
[CROP&MIX 2K]
[CROP 4K]
[CROP&MIX 2K]
[MAIN CODEC]
[422LongGOP 50M]
[422ALL-I 100M]
[AVCHD PH]
[AVCHD HA]
1fps - 30fps
1fps - 60fps
1fps - 240fps
1fps - 25fps
1fps - 50fps
1fps - 200fps
1fps - 50fps
1fps - 200fps
1fps - 60fps
1fps - 240fps
– 120 –
VFR
—
VFR