Table of Contents
Advertisement
Area Mode
You can apply a variety of effects to the subject you touch.
∫ Setting an Area Mode effect
You can select the following menu items to set an effect to be applied when you touch the subject.
MENU
: [SW SETUP] # [AREA MODE] # desired setting
[INH]:
[FOCUS]:
[IRIS]:
[Y GET]:
[FOCUS/IRIS]:
[FOCUS/Y GET]:
∫ Using Area Mode
≥ Register "Area Mode" to a USER button.
1
Press the applicable USER button or touch the applicable USER button icon
on the recording screen.
≥ Area Mode will be enabled and
2
Touch the recording screen.
≥ The area frame will be displayed on the part you have
touched. The effect of the selected menu item will be
applied.
To turn off Area Mode
(With a USER button)
Press the USER button
(With a USER button icon)
1
Touch and hold the recording screen to display operation icons.
2
Touch the USER button icon.
To change the size of the area frame
You can rotate the jog dial to change the size of the
area frame.
≥ The area frame is available in three sizes.
Does not apply any effects of Area Mode.
Optimizes the focus automatically for the subject you touch.
Optimizes the iris automatically for the subject you touch.
Displays the luminance level of the subject you touch.
Optimizes the focus and iris automatically for the subject you touch.
Optimizes the focus automatically for the subject you touch and
displays the luminance level of the subject.
(l
will be displayed.
- 87 -
79)
A Area frame
Advertisement
Table of Contents
