Train The Talking Clock; Use The Talking Clock - Oregon Scientific RM998PS User Manual

TRAIN THE TALKING CLOCK

To use the talking clock you need to train it to recognise
your commands. To do this, follow the key steps below and
listen to the clock's voice prompts:
TASK ACTION
Start training program (1st time training) Press Sound /
off or TALK
Select user 1 or 2 Press
press TALK
Tell the clock a word you would like to Say your password
become your password. (This word will
be used from now on to activate the
talking clock)
Train the clock to recognise your Speak the command
commands. To do this, devise your own twice when asked
words for asking the clock to:
• Check the time
• Check alarm 1 and 2 status
• Turn alarm 1 or 2 ON / OFF
• Check the temperature
• Turn the projector ON
TIP The clock responds better to simple
commands
Skip to the next training command or Press
train more commands
Exit the training program Press Sound /
Re-do the training program Press and hold TALK
9
RM998Pmanual-E
USE THE TALKING CLOCK (ONCE IT HAS BEEN
TRAINED)
Use the steps detailed below and listen to the voice prompts:
TASK
Turn the talking clock ON
on /
Bypass the introduction
or . Then
Activate the talking clock when it is in
Standby Mode
Listen to trained commands
Exit the talking clock
Turn the talking clock OFF
NOTE When the talking clock is waiting for your voice
commands, the icon
NOTE If the talking clock gets no response to its voice
prompts after approx. 1 min, it will sound a beep and go into
Standby Mode. To activate it, simply say your password.
NOTE The following talking clock languages are available
with these models:
• RM998PS – English, Italian, French and Spanish
on / off
• RM998PG – English, Italian, French and German
9
04/12/7, 2:51 PM
ACTION
Press Sound / on / off
or TALK
Press TALK
Say your password
Press TALK
Let the unit idle and it will
automatically go into
Standby Mode
Press Sound / on /
off twice
will flash to show it is waiting.