DESCRIPTION OF PARTS RADIO CONTROLLED CLOCK WITH INDOOR THERMOMETER MODEL : RM962 / RM962U Instruction Manual INTRODUCTION Congratulations on your purchase of the Clock with Temperature Display RM962/RM962U . The RM962 is a multifunction radio controlled clock. It can automatically synchronize its current time and date when brought within an approximate 1500 km radius of the radio signal DCF77 generated from Frankfurt, Germany (RM962U - the UK version from MSF-60 Rugby, England).
F MODE button Toggles the calendar clock display modes or activates the calendar clock setting mode G UP [ ] and DOWN [ ] buttons Increases or decreases the value of a setting H ALARM button Displays the alarm time or sets the alarm status ] button Note: The battery life can be reduced vastly by frequent use Activates the snooze function when an alarm activates or...
Page 3
(RM962U - UK version within a 1500km radius of radio signal To deactivate the auto-reception of RF signal, press and hold both (MSF-60) from Rugby, England) ] and [ ] buttons for 2 seconds. The antenna icon will disappear to show this deactivation. When the batteries are first installed, the unit will automatically search for a radio signal.
3. Press MODE to confirm and proceed to set the day, display CALENDAR AND ALARM TIME DISPLAY language, day-of-the-week, hour and minute. 4. For the display language, you can choose between (E) for The calendar and the alarm-time share the same section of the English (D) for German (F) for French, (I) for Italian and (S) for display.
2. Enter the value for the hour digits. Press ALARM to confirm and The button is required only when the unit is not operating in a go to the minute digits. Enter the value and press ALARM to favorable way, such as in the rare case of a malfunction. confirm.
General Specification SPECIFICATIONS Battery Type : Two (2) UM-4 or “AAA” size Operating Temperature : 5° C to 50° C 1.5V battery Unit Dimension : 104 x 64 x 21 mm (H x W x D) Clock Functions Unit Weight : 80 g (without battery) Radio Control : Auto synchronize current time and...
EC-DECLARATION OF CONFORMITY This product complies with the essential requirements of Article 3 of the R&TTE 1999/5/EC Directives, if used for its intended use and that the following standard(s) has/have been applied: Efficient use of radio frequency spectrum (Article 3.2 of the R&TTE Directive) applied standard(s) N / A Electromagnetic compatibility...
Page 8
TROUBLESHOOTING GUIDE — RM962 Trouble Possible Cause Remedy Reception icon “Antenna” is not Auto-reception of clock radio signal has Enable this function by following the shown been disabled instructions in the User’s Manual Displayed Temperature data is (1) The measurement method is different (1) Use the same instruments with different from other measuring consideration of the tolerance of...