Control Panel - Panasonic NN-GD692 Important Safety Instructions Manual

Control Panel

(1) Display Window (pg. 5)
(2) Micro Power Button (pg. 6)
(3) Grill Button (pg. 7)
(4) Combination Button (pg. 8)
(5) Sensor Reheat Button (pg.16)
(6) Sensor Cook Button (pg.17)
(7) Auto Combi Button (pg.11)
(8) Auto Reheat Button (pg. 12)
(9) Inverter Melt & Soften Button (pg.13)
(10) Inverter Turbo Defrost Button (pg. 14)
(11) Time/Weight and More/Less Dial
Press and release dial to expand (pop-up). After setting
desired program, push dial in to avoid accidental
changing of the Programmed time.
(12) Recipe Store Button (pg. 9)
(13) Timer/Clock Button (pg. 5, 19)
(14) Quick Min Button (pg.10)
(15) Stop/Reset Button
Before cooking: One tap clears all your instructions.
During cooking: One tap temporarily stops the
cooking process. Another tap cancels all your
instructions and colon or time of day appears in the
Display Window.
IP4223_39X90HP_Eng_23_120626.indd 4 IP4223_39X90HP_Eng_23_120626.indd 4
(1)
(2)
(3)
(5)
(6)
(8)
(9)
(11)
(12)
(15)
- Eng-4 -
(4)
(7)
(10)
(13)
(14)
(16)
(16) Start Button
One tap allows oven to begin functioning. If door is
opened or Stop/Reset Button is pressed once during
oven operation, Start Button must be pressed again to
restart oven.
Beep Sound:
When a button is pressed correctly, a beep will be heard. If
a button is pressed and no beep is heard, the unit did not
or cannot accept the instruction. The oven will beep twice
between programmed stages. At the end of any complete
program, the oven will beep 5 times.
NOTE:
If an operation is set and Start Button is not pressed, after
6 minutes, the oven will automatically cancel the operation.
The display will revert back to clock or colon mode.
2012-6-26 16:05:54 2012-6-26 16:05:54