Care; Specifications; Troubleshooting - Philips BDP9500 User Manual

2
Download the software into a USB flash drive:
a Un-zip the download, and make sure
that the un-zipped folder is named
"UPG".
b Put the "UPG" folder in the root
directory.
3
Insert a USB flash drive to the
on this product.
4
In the Home menu, select [Settings] >
[Advanced Setup] > [Software Download] >
[USB].
5
Follow the instructions on the TV screen to
confirm update operation.
»
Once software update is complete, this
product automatically turns off to standby.
6
Disconnect the power cord for a few seconds
and connect again to turn on this product.
Note
•
Do not turn off the power or remove the USB flash
drive when software updating is in progress to prevent
possible damage of this product.

Care

Caution
•
Never use solvents such as benzene, thinner, cleaners
available commercially, or anti-static sprays intended
for discs.
Clean discs
Wipe the disc with a micro fibre cleaning cloth from
the centre to the edge in a straight line movement.
Specifications
Note
•
Specification and design are subject to change without
notice
Video
• Signal system: PAL / NTSC
• Composite video output: 1 Vp-p (75 ohm)
• Component video output: 480/576i, 480/576p,
720p, 1080i
• Y: 1 Vp-p (75 ohm)
• Pb: 0.7 V-pp (75 ohm)
• Pr: 0.7 V-pp (75 ohm)
• HDMI output 480p, 576p, 720p, 1080i, 1080p,
1080p24
Audio
22 EN
•
•
(USB) jack
•
•
USB
•
•
Main unit
•
•
•
•
•
Accessories supplied
•
•
•
•
•
Laser Specification
•
•
•

8 Troubleshooting

•
To keep the warranty valid, never try to repair the
product yourself.
2 Channel analog output
• Audio Front L + R : 2 Vrms (> 1 kohm)
• Signal to noise ratio: > 120 dB
• Dynamic Range (1kHz): >100 dB
• Total harmonic distortion: <90 dB
7.1 Channel analog output
• Audio Front L + R : 2 Vrms (> 1 kohm)
• Audio Surrond L + R : 2 Vrms
(> 1 kohm)
• Audio Center : 2 Vrms (> 1 kohm)
• Audio Subwoofer : 1.15 Vrms (> 1 kohm)
• Audio Rear L + R: 2 Vrms (> 1 kohm)
Digital output: 0.5 Vp-p (75 ohm)
• Optical, Coaxial
HDMI output
Compatibility: Hi-Speed USB (2.0)
Class support: UMS (USB Mass Storage Class)
Power supply rating
• Europe: 220~230V ~AC, 50 Hz
• Asia Pacific: 220~240V ~AC, 50 Hz
• China: 220~240V ~AC, 50 Hz
Power consumption: 25 W
Power consumption in standby mode:
< 0.25 W
Dimensions (w x h x d): 437 x 91 x 268 (mm)
Net Weight: 4.2 kg
Remote control and batteries
Audio/Video cables
Power cable
Quick start guide
User manual
Laser Type:
• BD Laser Diode: InGaN/AIGaN
• DVD Laser Diode: InGaAIP
• CD Laser Diode: A IGaAs
Wave length:
• BD: 405 +5nm/-5nm
• DVD: 650 +13nm/-10nm
• CD: 790 +15nm/-15nm
Output power:
• BD: Max. ratings: 20mW
• DVD: Max. ratings: 7mW
• CD: Max. ratings: 7mW
Warning
Risk of electric shock. Never remove the casing of the
product.