Connect Power; Get Started; Prepare The Remote Control; Find The Correct Viewing Channel - Philips BDP9500 User Manual

Connect power

Caution
•
Risk of product damage! Ensure that the power supply voltage
corresponds to the voltage printed on the back of the unit.
•
Before connecting the AC power cord, ensure you have
completed all other connections.
Note
•
The type plate is located on the back of the product.
•
You may experience tingling feel upon touching the metal
case of this product. This tingling feel is common for
products with aluminum finishing. It does not cause any
harm as consumer safety is not compromised.
1
Connect the AC power cable to:
• this product.
• the wall socket.
»
This product is ready to be set up for use.

4 Get started

Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.

Prepare the remote control

Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
1
Press and push the battery compartment to
slide it open (see "1" in the illustration).
2
Insert two AAA batteries with correct
polarity (+/-) as indicated.
3
Push and slide back the battery compartment
(see "3" in the illustration).
Note
•
If you are not going to use the remote control for a long
time, remove the batteries.
•
Do not use old and new or different types of batteries
in combination.
•
Batteries contain chemical substances, so they should be
disposed of properly.

Find the correct viewing channel

1
Press to turn on this product.
2
Turn on the TV and switch to the correct
video-in channel (refer to the TV user manual
on how to select the correct input channel).

Use the Home menu

1
Press .
• To start disc play, select
• To view the USB contents, select
• To access the setup menus, select

Navigate the menu

1
When a menu is displayed, press the buttons
on the remote control to navigate.
Button
OK
[Play Disc].
[USB].
[Settings].
Action
Move up or down.
Move left or right.
Confirm a selection.
Enter numbers.
EN 11