Blu-ray Disc Player Welcome Quick start guide BDP9000 Prepare Connect Set up Enjoy...
Page 2
b. Remote control RC4380 NOTE: Refer to the user manual for: • Important safety instructions. • Other possible connections (for example, digital audio).
Prepare Prepare the remote control 1 Open the battery compartment of the remote control. 2 Insert the batteries correctly. 3 Close the battery compartment. Connect For more information about the ports on your TV, refer to the user manual of your TV. Connect the TV Option 1 - Best high-definition quality - For TVs with an HDMI port: 1.
4. Take the supplied audio cable (i). 5. Plug one end of the audio cable into the AUDIO-L and AUDIO-R ports. 6. Plug the other end of the audio cable into the TV. Option 3 - Good quality - For TVs with component video ports: 1.
Page 5
Set up 1. Turn the TV on. 2. Set the TV to the correct external input. 3. Press the STANDBY-ON button. > The STANDBY-ON light comes on as blue. 4. Open the user access panel. 5. If the TV connection is HDMI (refer to 1A), press the VIDEO OUTPUT SELECTION button until the HDMI light comes on.
Enjoy Load a disc 1. Press the OPEN/CLOSE button. > The disc tray opens. 2. Put the disc in the disc tray with the label on the top. 3. Press the OPEN/CLOSE button again. > The disc tray closes. Control a disc You can now enjoy your Blu-ray Disc player.
Troubleshooting Problem Cannot play a disc No video signal on the connected TV Bad video signal on the connected TV Incorrect aspect ratio on the connected TV No audio signal • Put the disc in the disc tray with the label on the top. •...