Chrysler Journey Owner's Manual page 225

JOBNAME: cims CHRY OM French PAGE: 225 SESS: 2 OUTPUT: Mon Nov 22 10:53:21 2010 SUM: 33535F02
/chry_pdm/chrysler/owners/jcd/og
• Navigation Turn-By-Turn in Cluster
When this feature is selected, the turn-by-
turn directions will appear in the display as
the vehicle approaches a designated turn
within a programmed route. To make your
selection, press the Navigation Turn-By-
Turn in Cluster soft-key, until a check-mark
appears next to the setting, showing that
setting has been selected. Press the back
arrow soft-key to return to the previous
menu.
• Fuel Saver Display in Cluster
The "ECO" message is located in the
instrument cluster display, this message
can be turned on or off. To make your
selection, press the Fuel Saver Display
soft-key, until a check-mark appears next
to the setting, showing that setting has
been selected. Press the back arrow soft-
key to return to the previous menu.
Clock
After pressing the Clock soft-key the fol-
lowing settings will be available.
• Sync Time with GPS
When in this display you may automati-
cally have the radio set the time. To
change the Sync Time setting press the
Sync with GPS Time soft-key until a check-
mark appears next to the setting, showing
that setting has been selected. Press the
back arrow soft-key to return to the previ-
ous menu.
• Set Time Hours
When in this display you may adjust the
hours. The Sync with GPS Time soft-key
must be unchecked. To make your selec-
tion press the + or - soft-keys to adjust the
hours up or down. Press the back arrow
soft-key to return to the previous menu or
UNDERSTANDING YOUR INSTRUMENT PANEL
press the X soft-key to close out of the
settings screen.
• Set Time Minutes
When in this display you may adjust the
minutes. The Sync with GPS Time soft-key
must be unchecked. To make your selec-
tion press the + or - soft-keys to adjust the
minutes up or down. Press the back arrow
soft-key to return to the previous menu or
press the X soft-key to close out of the
settings screen.
• Time Format
When in this display you may select the
time format display setting. Press the Time
Format soft-key until a check-mark ap-
pears next to the 12hrs or 24hrs setting,
showing that setting has been selected.
Press the back arrow soft-key to return to
the previous menu.
225