Specifying Reproduction Ratio Manually - Toshiba e-studio2000ac Copying Manual

2.HOW TO MAKE COPIES
 Specifying reproduction ratio manually
Press [ZOOM] on the BASIC menu.
1
Press the buttons below to select the desired reproduction ratio.
2
[ UP] and [ DOWN] buttons
The reproduction ratio changes by 1% every time either of them is pressed. When you hold either down, the ratio
goes up or down automatically.
One-touch zoom buttons
Select the desired ratio from [400%], [200%], [100%], [50%] and [25%].
When the ADF is used, the maximum ratio available is 200%.
3 Select the desired size, and then press [OK].
 If you want to select a paper size other than the following, you need to register the size as "OTHER". Once you
register this size, it will be specified every time you press [OTHER] on the touch panel.
North America: LD, LG, LT, ST
Other than North America: A3, A4, B4, B5
For how to register, see the following page:
 P.46 "Registering paper sizes to "OTHER" size"
 Paper sizes can also be registered by pressing the desired drawer button of the equipment status indication
area on the BASIC menu.
48 Enlarging or Reducing Images