6. The system will notify you that the
setting is complete.
If the setting is not available, the following
notification will be displayed. For more
details, contact a SUBARU dealer.
! Auto light sensor sensitivity setting
1. Perform the preparation steps accord-
ing to "Preparation for car settings" F3-62.
2. Operate the "
" or "
select the "Auto Light Sensor" item. Then
pull the " /SET" switch toward you.
Instruments and controls/Multi function display
3. The current setting will be displayed.
Pull the " /SET" switch toward you to
enter the selection mode.
" switch to
4. Select the preferred setting by operat-
ing the "
" or "
" /SET" switch toward you.
3-67
" switch. Then pull the
– CONTINUED –