Table of Contents
Advertisement
3-54
Instruments and controls/Multi function display
3. Select the setting location (left, center
or right) by operating the "
switch. Then pull the " /SET" switch
toward you.
NOTE
The same item cannot be selected for
the left, center or right location.
4. Select the preferred item by operating
" or "
"
the "
" or "
SET" switch toward you.
If you also want to change the setting for
another location, repeat steps 3 and 4.
5. Select "Set" by operating the "
" switch. Then pull the " /
"
switch, and confirm the setting by pulling
the " /SET" switch toward you.
6. The system will notify you that the
setting is complete.
! Clock screen setting
1. Perform the preparation steps accord-
ing to "Preparation for screen settings"
F3-50.
Advertisement
Table of Contents
