Table of Contents
Advertisement
7. Select characters by operating the
"
" or "
" switch. Then pull the " /
SET" switch toward you.
– You can select characters of the
English alphabet (upper case charac-
ters and lower case characters are
available), eleven symbols or blank
spaces.
– The word being edited will be
displayed with an underline.
8. After entering the name by repeating
step 7, select "Set" by operating the "
switch and confirm the setting by pulling
the " /SET" switch toward you.
9. The system will notify you that the
setting is complete.
Instruments and controls/Multi function display
! If an anniversary is approaching
If an anniversary is approaching, the
following screen will be displayed accom-
panied by a beep when the ignition switch
has been turned to the "ON" position. This
function can be set on or off. For details,
refer to "Bypass screen setting" F3-55.
"
From 1 to 7 days prior to the anniversary
3-45
– CONTINUED –
Advertisement
Table of Contents
